Takisawa Lathe?
A local machine shop has one of these lathes and thinks highly of it. One came up for sale not too far away but it has an issue with a bearing in the headstock according to the owner. Is this something...
View ArticleHardinge R8 Collets?
I purchased a very nice set of used Hardinge R8 collets off of eBay recently. They don't appear to have ever been used but the threads on one of the collets are messed up. I tried to chase them with a...
View ArticleHLVH 2 speed motor doesnt like low speed anymore
I have a beautifully restored 1989 HLVH restored lathe. Reground ways, repainted and each nut screw and washer went over and made like new. I dont use it every day so it may sit and just look pretty...
View ArticleVise Recommendation?
OK, got a Bridgeport mill but now need a vise for general prototyping. Any suggestions? I understand Kurt is a popular brand but which one?
View ArticleTaking a step-pulley B'Port head apart?
I recently became the proud owner of a 1963 Bridgeport. It has damaged pins for the cam that you turn to switch to back gear (the one on top). I've found plenty of stuff about how to take it apart, but...
View ArticleBridgeport horizontal milling arbor
Regarding the horizontal milling arbor, driven by the right angle attachment, and supported by the support that clamps to the ram dovetail: Is this a generic arbor, or something unique to this setup?...
View ArticleStep chuck question
I need to get some 5c step chuck tooling for my HLV-H. The part diameters are around 1.60 inch. One option would be to buy a Hardinge 2-inch closer and some of their machinable collets, but itÂ’s a bit...
View ArticleSwapping major components between Bridgeports
Bridgeport experts, I have two Bridgeport mills. I'd like to switch the tables between the two mills while leaving the saddles (and everything else beyond) unchanged. Doing this because one of the...
View ArticleClik here to view.
The Thirsty Crow dj
One hot day, a thirsty crow flew all over the fields looking for water. For a long time, he could not find any. He felt very weak, almost lost all hope. Suddenly, he saw a water jug below the tree. He...
View ArticleClik here to view.
Hardinge HC Bed Wipers - Home Made
Chaps, Last week I replaced the bed wipers on a Hardinge HC lathe with some generic Dynatech FB-AW wiper strip. While it would do the job, I thought it looked a bit ordinary, and CNCed up a pair of...
View ArticleYANDEX Mail 18OO-68I-72O8 Contact YANDEX Mail Tec*hhh Suporttt care??
asd dekhe jara kisme ki
View ArticleYANDEX Mail 18OO-68I-72O8 Contact YANDEX Mail Tec*hhh Suporttt care??
YANDEX\ Contact YANDEX Tec*hhh Suporttt
View ArticleYANDEX Mail 18OO-68I-72O8 Contact YANDEX Mail Tec*hhh Suporttt care??
YANDEX\ Contact YANDEX Tec*hhh Suporttt phone
View ArticleYANDEX Mail 18OO-68I-72O8 Contact YANDEX Mail Tec*hhh Suporttt care??
YANDEX\ Contact YANDEX Tec*hhh Suporttt phone number
View ArticleYANDEX Mail 18OO-68I-72O8 Contact YANDEX Mail Tec*hhh Suporttt care??
YANDEX\ Contact YANDEX Tec*hhh Suporttt phone number customer service
View ArticleYANDEX Mail 18OO-68I-72O8 Contact YANDEX Mail Tec*hhh Suporttt care??
YANDEX\ Contact YANDEX Tec*hhh Suporttt phone number customer care
View ArticleYANDEX Mail 18OO-68I-72O8 Contact YANDEX Mail Tec*hhh Suporttt care??
YANDEX\ Contact YANDEX Tec*hhh Suporttt phone number customer care YANDEX\ Contact YANDEX Tec*hhh Suporttt phone number customer care YANDEX\ Contact YANDEX Tec*hhh Suporttt phone number customer care
View ArticleYANDEX Mail 18OO-68I-72O8 Contact YANDEX Mail Tec*hhh Suporttt care??
Hello, I'm looking to move to a new shop and the foundation is only 4" The pre-installation guide from Haas recommends 6" for all the machines (from a Mini to a VF12). I want to believe that 6" for a...
View ArticleJ head spindle bearing wick question
Hi all, I have a 1952 J head Bridgeport I bought about 20 years ago. I have a question about the spindle oil cup and related components. They are listed in the parts section of the manual as item...
View Article