I am new to the forum and I am not sure what the best group is to post my question. If there is a better group to post this question please let me know.
I need some help from someone with an 80's era Lagun mill with a 2hp motor. I am not electrically astute but have an electrician friend helping me to install a VFD on this mill. We are not able to confirm if this mill is configured for low or high voltage (240 or 440). Besides the motor name plate (pictured below) there is no other labeling. If there is anyone that has this motor on there mill and you are running at 240v would you be kind enough to take a picture of how the jumpers are configured. Any help is greatly appreciated.
Rick
![Click image for larger version.
Name: Motor Jumpers.jpg
Views: 13
Size: 88.6 KB
ID: 302761]()
![Click image for larger version.
Name: Motor Label.jpg
Views: 9
Size: 56.4 KB
ID: 302762]()
I need some help from someone with an 80's era Lagun mill with a 2hp motor. I am not electrically astute but have an electrician friend helping me to install a VFD on this mill. We are not able to confirm if this mill is configured for low or high voltage (240 or 440). Besides the motor name plate (pictured below) there is no other labeling. If there is anyone that has this motor on there mill and you are running at 240v would you be kind enough to take a picture of how the jumpers are configured. Any help is greatly appreciated.
Rick
