I just posted this in the CNC machining section, before remembering about the Hardinge section here.
I fired up the machine today to put a new battery in since it's been several yrs since I've put a new one in. Fired up fine, pull out battery tray, put new battery in and put battery tray back in, but now the "1 ORD 6 Battery Alarm Power Supply" alarm won't clear. Now what? I did verify the voltage prior to installing, 3.6v on the money. Old batt also has 3.6v. Swapping old battery back in does not clear it. Any ideas? Thanks!
Edit: I'm keeping machine on overnight in fear of loosing parameters if I turn it off.
![Click image for larger version.
Name: 2019-08-05 21.11.17.jpg
Views: 2
Size: 91.3 KB
ID: 262536]()
I fired up the machine today to put a new battery in since it's been several yrs since I've put a new one in. Fired up fine, pull out battery tray, put new battery in and put battery tray back in, but now the "1 ORD 6 Battery Alarm Power Supply" alarm won't clear. Now what? I did verify the voltage prior to installing, 3.6v on the money. Old batt also has 3.6v. Swapping old battery back in does not clear it. Any ideas? Thanks!
Edit: I'm keeping machine on overnight in fear of loosing parameters if I turn it off.
