My eccentric bolt was badly pitted on my compound and I wanted to make a new bolt before it snapped and created a nightmare.
I used the dimentions and advice that jim Caudill posted and it worked out great.
Used my 4 jaw to do the offset diameter once the other diameters were turned, I used a dial indicator to set the offset.
I used a high strength 5" 7/16" cap head bolt from McMaster Carr for $8 instead of the $45 for the bolt from Hardinge.
I used the dimentions and advice that jim Caudill posted and it worked out great.
Used my 4 jaw to do the offset diameter once the other diameters were turned, I used a dial indicator to set the offset.
I used a high strength 5" 7/16" cap head bolt from McMaster Carr for $8 instead of the $45 for the bolt from Hardinge.