Hardinge HLV-H EM wiring help

If anyone could help with a print I would appreciate it.

I picked up this machine last week and brought it home, pretty cruddy but before I did anything I put the correct power to it and it ran perfect. Then after a brief wipe down I wanted to check the brake and coolant.

Nothing, It will run if I manually engage the contactor, but I cannot get the emergency stop button to make any connection as it did the initial time I used it.

I checked the micro switch for the spindle stop and that was working correctly.

There is no prints in the door, I believe this is why they got rid of it, upon looking in the swarf pan I found the plastic caps that cover the wiriing loom in the cabinet. Which makes me think they had an issue with this and maybe the ride home shook it around and it worked the initial time and now it will not.

Here is the wiring schematic that is needed.

Thanks in advance.
Mick

Attached Thumbnails